 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AND262HBA Ultra Bright LED Lamps: Type 3 Weight: 0.14g Unit: mm AND262HBA GaN High Brightness Blue Light Emission * 3 mm (T-1) Package * Peak wavelength (p = 430nm) high bright emission * All plastic mold type, clear colorless lens * Low drive current: 1 to 20 mA DC * Excellent On-Off contrast ratio * Fast response time, capable of pulse operation * High power intensity * High reliability * RoHS Compliant Maximum Ratings (Ta = 25C) Characteristics Forward Current Reverse Voltage Power Dissipation Operating Temperature Range Storage Temperature Range Symbol IF VR PD TOpr TSig Rating 30 5 120 -40 to 85 -40 to 100 Unit mA V mW C C Electro-Optical Characteristics (Ta = 25C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Symbol VF IR IV P d Test Condition IF = 20 mA VR = 5V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IV = 1/2 Peak Minimum - - 160 - - - - Typical 3.8 - 250 430 65 466 40 Maximum 4.5 50 - - - - - Unit V A mcd nm nm nm degree Precaution Please be careful of the following: 1. Soldering temperature: 260 C max. Soldering time: 5 sec. max. Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. 3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is recommended to use wrist band or antistatic gloves when handling these LEDs Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com * www.purdyelectronics.com 7/18/07 AND262HBA GaN High Brightness Blue Light Emission Ultra Bright LED Lamps: Type 3 IF - VF 50 Luminous Intensity IV (mcd) 5000 3000 Ta = 25C IV - IF Forward Current IF (mA) 30 Ta = 25C 1000 500 300 10 5 3 100 50 1 3.2 3.4 3.6 3.8 4.0 4.2 4.4 Forward Voltage VF (V) 20 1 3 5 10 30 50 100 300 500 Forward Current IF (mA) IV - TC 3 Relative Luminous Intensity 1.0 Relative Luminous Intensity - Wavelength IF = 20 mA Ta = 25C Relative Luminous Intensity 0.8 1 0.5 0.3 0.6 0.4 0.2 0 350 400 450 500 550 600 Wavelength (nm) 0.1 -20 0 20 40 60 80 Case Temperature TC (C) Radiation Pattern 40 10 0 Ta = 25C 20 30 40 50 60 70 80 90 0 0.2 0.4 0.6 0.8 0 0 Allowable Forward Current IF (mA) IF - Ta 20 30 40 50 60 70 80 90 10 30 20 20 20 40 60 80 Ambient Temperature Ta (C) 100 Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com * www.purdyelectronics.com 7/18/07 |
Price & Availability of AND262HBA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |